NEW Solar Powered Twin Electric Motors Motorized Boat, PMA generator - part 1, part 1.01, part 1.02
eBike hub motor alert. Warning! Attention for all Electric Hub Motor Users! Click here for details.
NEW HOT WATER SYSTEMS

	516 m2 490 m2 460 m2 455 m2 424 m2 336 m2 280 m2 275 m2 261 m2 260 m2 253 m2 225 m2 180 m2 170 m2 169 m2

Timber
Timber in the region of Archangelsk is famous for its good quality. The best and most durable timber comes from the White Sea area close to the Arctic Sea. The severe climate of this area makes this timber material unique. The timber that grows in a warm climate, far from the White Sea, is friable. The internationally famous White Sea timber from Archangelsk is solid, dense, and durable.

Canadian and Norwegian Cutting Methods
Our Company builds log homes by manual cutting. Beside the traditional “Russian corners”, we assemble the homes by the method of “Norwegian lock” and “Canadian bowl”. These log assembling methods are very sophisticated and comply with Canadian and Norwegian technologic instructions. You can evaluate the quality of our constructions by seeing our pictures, visiting our manufacturing plant or our office in Toronto, Ontario. Thanks to the enhanced assembling technology, the corner of a trapezoid “bowl” dries out and gets stuck firmly, assuring durability of connected logs assembled according to every kind of cutting.

Fire safety
We use fire safe and environmentally friendly coating of a new generation. This material has the following unique qualities:

• High level of fire safety;
• High level of protection against fungi and mould;
• High level of protection against woodworms and wood borer beetles;
• Water resistance that makes log homes durable in a rainy environment;
• High resistance against acid rains.

After home assemblage and before roofing, an acid rainfall affects the timber and changes its colour to grey. The coating provides a high level of protection against discolouration of the wood by ultraviolet sun rays. Frost resistance and efficiency of the coating allow its use under low temperatures (up to minus 30 C). Agent compounds are wood friendly and contain alkalis, salts, and chloride. It is ecologically safe and passed the health service test and was certified for safety, and can be used both inside and outside of homes and saunas.

The coating reduces cracking of the logs during drying out and settling of the log home thanks to even distribution of moisture inside of the logs, prevents the outer layer of the log from extreme dryness. It has a beautiful saturated amber colour. The outer side of the log home can be painted with decorative lacquers. The lacquer layer depends on the wood density and can be thick up to 5 mm.

The Sphagnum Moss, a Wonderful Material, Created by Mother Nature
The sphagnum moss grows in marshy, peat bog areas often beside cranberries. The size of the moss is between 5 and 30 cm, and it does not decay. It is recommended to place a fresh moss between logs while building a log home. It creates natural ventilation between log slots and maintains a pleasant microclimate and traps the warmth inside.
The sphagnum moss is a wonderful durable insulation material that has a pleasant smell when being used between logs. This moss contains sphagnol, a substance that prevents wood from decay process and kills any bacteria. That’s why all objects dropped into a sphagnum peat bog get well preserved for many centuries. During the World War I and II, Russian soldiers used moss to cure their wounds.
This moss is used for indoor plants. The moss like sand has no nutrition value, but it makes the soil loose, light, and hydroscopic. That helps tender plant roots penetrate the soil deeper and stay there firmly. The sphagnum moss absorbs easily moisture, is able to keep more water inside than its volume and moistures that way evenly the soil. The sphagnum moss is also an efficient remedy to cure the root system of the indoor plants, for it contains the sphangol substance. It is also a bactericide preventing roots from decay. It is also used for growing young leaves and inoculation of saplings. The moss affects positively the growth of flowers that are sensitive to dehydration. The sphagnum moss is a perfect agent for strengthening of leave grafts. In the past, the moss was traditionally used as an excellent insulator to keep warmth inside of homes. However, not every kind of moss can be used for log homes. Our Company collects the moss in the Archangelsk area, an environmentally friendly place in Russia.

Solar photovoltaic (PV) systems.

Today there are three forms of commercially available solar cells - monocrystalline, polycrystalline and thin-film. Each of these technologies has its benefits and demonstrated strengths. Due to their higher efficiency and longer useful life monocrystalline cells have been the technology most favoured by industry, however, the trend and future seems to lie with thin-film which typically has demonstrated lower cost per watt, cell efficiencies and life expectancy.

Wind energy systems.

The wind is a renewable energy source, continuously generated or replenished by the forces of nature. Renewable energy technologies, such as wind energy systems and solar photovoltaic (PV) systems, which use sunlight, convert renewable resources into usable forms of energy that can complement or replace conventional energy sources.
Wind is very complex process, which can be described very simply. The sun heats the earth at different rates depending on weather an area is below clouds, in direct sunlight, or covered with water. The air above the warmer areas heats up, becomes less dense, and rises. The rising air creates a low-pressure area. Cooler air from adjacent higher-pressure areas moves to the low-pressure areas. This air movement is wind.

The assembly of a wind turbine in front of the Field Museum near Lake Shore Drive in Chicago.

					Designed and manufactured by Li-ion battery experts at Tenergy Corporation, the battery packs and modules offered here are pre-wired and configurated with protective circuit board (PCB). These battery packs are ideal for use right away or for making battery packs by connecting them in parallel or in serial for higher capacity or voltage.
					Better performance in driving electronics and huge money saving are the two major reasons to buy NiMH (Nickel metal Hydride) rechargeable batteries. They can be charged up to 500-1000 times and last longer than alkaline or NiCd batteries.
					We are offering a wide selection of Tenergy Brand high capacity NiCd rechargeable batteries. We provide these batteries to you at great saving opportunities. The volume discount tables listed in each cell.
					Extraordinary Long Cycle Life -Best can up to 2000 cycle life, would be over 8 times life of Lead Acid and 3-4 times of Li-ion. Wide working temperature range —From -4 F to 150 F (-20 C–+70C) Extremely cold and extremely hot weather will not effect its performance. Flexible Form Factor - Small in size and light in weight 1/3 weight of Lead Acid and 65% weight of NIMH. No memory effect.
					We are offering a rich selection of chargers for rechargeable batteries and packs. Categorized below are chargers for NIMH and NICD single cells (AA, AAA, C, D, 9V); NIMH and NICD battery packs (2.4V to 60V); Li-ion and Li-Polymer batteries and packs; and RCR123A batteries. Please selected the category to choose the right chargers for you.

Responsible Energy Corporation products 1 2 3 4 Affiliate Program

Permanent Rare Earth NdFeB magnets (for rotors, motors, generators, alternators, or custom built wind turbines).

A wide and growing variety of strong Neodymium Magnets in stock and ready to ship. These are strong magnets in a nickel-plated steel casing that allows the magnets to be easily installed into a generator of a small wind turbine project or hydro power station’s rotor. The shapes in the stock include discs, cylinders, blocks, cubes, spheres, rings, cones, pyramids, triangles, stars. One style of magnets comes with a hook attached, which can be incredibly handy on your fridge, in your locker, garage or shop.